It is natural that the shower head (shower head) will be blocked after being used for a long time. This does not mean that the shower head (shower head) is broken. Don't worry. You don't need to buy a new one at all. If scale is generated after long-term drainage, you only need to disassemble and clean the shower head (shower head).
Many people may find it troublesome to hear the disassembly and cleaning. In fact, the operation is very simple. It doesn't require you to completely disassemble the shower nozzle one by one. The shower head (shower head) is nothing more than a water outlet cover and a handle. If your home can adjust the size of water, there should be a software circle in the middle. You close it tightly and rotate it counterclockwise (or clockwise) so that it can come out. If your home is of non adjustable water size, it can't be disassembled, because most of them are welded tightly by plastic welding (ultrasonic).
Now let's learn how to clean the shower head (shower head)!
If some holes in your shower are blocked, drain the water first to see which holes are blocked. Then you have to turn on the shower head of the shower and see that there are many small holes on the shower head like the shower head. This is where the water comes out. Then we will first prepare a needle, and then use the needle to pierce the impurities in the perforation until there are no impurities in the hole. This method is the most direct, but be careful to prick the shower hole.
Secondly, we can use white vinegar to clean the shower head (shower head), which is also commonly used in the family. After we remove the shower head, put it into a small basin containing white vinegar and soak it for about two hours. After soaking, brush it with a toothbrush and then clean it with clean water; If there is hard water sediment, scrub it with lemon slices.
However, when cleaning the shower head (shower head), pay special attention not to use strong acid (preferably white vinegar) to avoid corrosion on the surface of the shower head. In order to ensure that the shower head is not blocked, we'd better clean the shower head every six months or less, so that you don't worry about the sudden blockage of the shower head when bathing, which will affect your mood.
At the same time, in order to ensure the service life of the shower head (shower), it is best not to install it directly below the Yuba, and it is best to be more than 60cm away from the Yuba, and often wipe the surface of the shower with a little flour with a soft cloth to make it still as new.
However, if the metal of your shower is seriously blocked due to rust, you have to use WD-40 rust removal and antirust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rusty layer can be separated from the metal layer. Make the rusty part contact with the metal and leave a protective film. Let the shower never rust.
If the shower in your home is still good, you can't take it lightly. You should start with prevention. Usually we should develop the good habit of taking a shower. Before the end of each shower, use a towel to scrub the shower outlet of the shower to prevent remaining scale.
If your shower has been for a certain number of years, and the appearance is relatively old. It's better to replace your shower with a new one. The continued use of such a shower is harmful to health. Because there may be a lot of harmful bacteria and impurities in it.